Alizaren Red Solution, 2 oz / 62.5 ml
- Unit Price: $
- Description: Used to differentiate calcite from dolomite. Instructions: Cover chips with thin layer of water, enought to wet the sample. Add two to three drops of Alizarin Red stain and wait up to three minutes, and rinse with water. Results: Calcite will turn deep pink to deep reddish-orange. Dolomite will either furn faint pink or not stain at all.
- Product Code: PP20150
Alizaren Red Solution, 4 oz / 125 ml
- Unit Price: $
- Description: Used to differentiate calcite from dolomite. Instructions: Cover chips with thin layer of water, enought to wet the sample. Add two to three drops of Alizarin Red stain and wait up to three minutes, and rinse with water. Results: Calcite will turn deep pink to deep reddish-orange. Dolomite will either furn faint pink or not stain at all.
- Product Code: PP20155
Alizaren Red Solution, 8 oz / 250 ml
- Unit Price: $
- Description: Used to differentiate calcite from dolomite. Instructions: Cover chips with thin layer of water, enought to wet the sample. Add two to three drops of Alizarin Red stain and wait up to three minutes, and rinse with water. Results: Calcite will turn deep pink to deep reddish-orange. Dolomite will either furn faint pink or not stain at all.
- Product Code: PP20160
Alizaren Red Solution, 16 oz / 500 ml
- Unit Price: $
- Description: Used to differentiate calcite from dolomite. Instructions: Cover chips with thin layer of water, enought to wet the sample. Add two to three drops of Alizarin Red stain and wait up to three minutes, and rinse with water. Results: Calcite will turn deep pink to deep reddish-orange. Dolomite will either furn faint pink or not stain at all.
- Product Code: PP20165
10% Hydrochloric Acid, 2 oz / 62.5 ml
- Unit Price: $
- Description: Used to determine if limestones and dolomites are present. Instructions: Place suspect sample chips in watch glass or spot plate. Cover with 10% HCl. Results: Limestone will strongly effervesce in cold HCl solution. Dolomite will have a much weaker effervescence in cold HCl but will have a much stronger reaction in hot HCl. Note: Keep all acids away from skin, nose and clothing.
- Product Code: PP20002
10% Hydrochloric Acid, 4 oz / 125 ml
- Unit Price: $
- Description: Used to determine if limestones and dolomites are present. Instructions: Place suspect sample chips in watch glass or spot plate. Cover with 10% HCl. Results: Limestone will strongly effervesce in cold HCl solution. Dolomite will have a much weaker effervescence in cold HCl but will have a much stronger reaction in hot HCl. Note: Keep all acids away from skin, nose and clothing.
- Product Code: PP20004
10% Hydrochloric Acid, 8 oz / 250 ml
- Unit Price: $
- Description: Used to determine if limestones and dolomites are present. Instructions: Place suspect sample chips in watch glass or spot plate. Cover with 10% HCl. Results: Limestone will strongly effervesce in cold HCl solution. Dolomite will have a much weaker effervescence in cold HCl but will have a much stronger reaction in hot HCl. Note: Keep all acids away from skin, nose and clothing.
- Product Code: PP20008
10% Hydrochloric Acid, 16 oz / 500 ml
- Unit Price: $
- Description: Used to determine if limestones and dolomites are present. Instructions: Place suspect sample chips in watch glass or spot plate. Cover with 10% HCl. Results: Limestone will strongly effervesce in cold HCl solution. Dolomite will have a much weaker effervescence in cold HCl but will have a much stronger reaction in hot HCl. Note: Keep all acids away from skin, nose and clothing.
- Product Code: PP20016
Methanol, 16 oz / 500 ml
- Unit Price: $
- Description: Use: To be used instead of water to wet samples. Results: Moistened with alcohol, samples will show good colour tones and porosity; permeability can be detected. Samples dry quickly.
- Product Code: W225-0461
Ethyl Alcohol, 4L
- Unit Price: $
- Description: Ethyl Alcohol, denatured (85% ethanol, 15% methanol)
- Product Code: FA407-P4
Hydrochloric Acid RG, 2.5L
- Unit Price: $
- Description: 36.5- 38% Hydrochloric Acid RG 2.5L
- Product Code: F351-285-212
Phenolphthalein, 2 oz / 62.5 ml
- Unit Price: $
- Description: 1% Phenolphthalein Indicator Solution, Use: To determine if commercial cement is present. Instructions: Place sample in watch glass, cover with a thin layer of water, enough to wet sample. Add one or two drops of Phenolphthalein. Results: If cement is present, the sample will turn pink.
- Product Code: PP20250
Phenolphthalein, 4 oz / 125 ml
- Unit Price: $
- Description: 1% Phenolphthalein Indicator Solution, Use: To determine if commercial cement is present. Instructions: Place sample in watch glass, cover with a thin layer of water, enough to wet sample. Add one or two drops of Phenolphthalein. Results: If cement is present, the sample will turn pink.
- Product Code: PP20255
Phenolphthalein, 8 oz / 250 ml
- Unit Price: $
- Description: 1% Phenolphthalein Indicator Solution, Use: To determine if commercial cement is present. Instructions: Place sample in watch glass, cover with a thin layer of water, enough to wet sample. Add one or two drops of Phenolphthalein. Results: If cement is present, the sample will turn pink.
- Product Code: PP20260
Trichloroethylene, 8 oz / 250 ml
- Unit Price: $
- Description: Use: To detect the presence of hydrocarbon, as well as its gravity if a chart is used. Instructions: Place a clean, dry sample in a watch glass. Add trichloroethylene to cover the sample to twice its depth and place it under a UV light. Results: If hydrocarbon is present, it will appear as a patch like color on top of trichloroethylene. Also look for individual chip bleeding for streaming. Color will vary from white through blue yellow to dark brown. Note: Do not mix with water or wet samples. Trichloroethylene, Carbon tetrachloride and Xylene are carcinogens.
- Product Code: PP20108
Trichloroethylene, 32 oz / 1 L
- Unit Price: $
- Description: Use: To detect the presence of hydrocarbon, as well as its gravity if a chart is used. Instructions: Place a clean, dry sample in a watch glass. Add trichloroethylene to cover the sample to twice its depth and place it under a UV light. Results: If hydrocarbon is present, it will appear as a patch like color on top of trichloroethylene. Also look for individual chip bleeding for streaming. Color will vary from white through blue yellow to dark brown. Note: Do not mix with water or wet samples. Trichloroethylene, Carbon tetrachloride and Xylene are carcinogens.
- Product Code: PP20132
Buffer Solution. pH 4.00, Color - Coded Red, 500 ml
- Unit Price: $39.95
- Description: Buffer Solution. pH 4.00, Color - Coded Red, 500 ml
- Product Code: FSB101-500
Page 1 of 2 Page: | 1 | 2 |